1.6J/M 800W LTC Miner Machine , BM1485 Bitmain Antminer L3+ 504mh

Product Description

Bitmain Antminer L3+ LTC Miner Machine BM1485 Litecoin mining scrypt

Antminer L3+ adopts front and rear dual fans, four computing power boards (other ant series mining machines are three computing power boards) mining machine design. Body integrated molding. Using precision die-casting design and aluminum alloy material, it provides strong protection for computing chips. It also improves the overall cooling performance of the fuselage.

Top of the miner: L3+ has 4 hash boards, each with three PCI-E6pin interfaces, the hash board is connected to the controller's four data lines and the control board interface.

Front of the miner: IP address feedback button, network cable interface, reset button and status indicator, etc. Antminer L3+ logo and QC label and air inlet fan.

Noise: The test site is a conference room with an area of about 30 square meters, and the room temperature is 20 degrees. The heat and noise tests are performed after the mining machine has been running for 24 hours. At a distance of 10cm from the mining machine, the measured noise of the mining machine was 74dB, and the noise dropped to 67dB at a distance of 1 meter.

Computing power: The official standard computing power is 504M. During the 24 hours of the actual test, the actual average computing power is about 500M/S.

Power consumption: The official standard power consumption is 800W, and the power consumption in the actual test is 773W.

Q: How about after-sales?

A: 

The after-sales service of this product is as follows:

1. After the deposit or payment is made, the contract cannot be terminated for unilateral reasons.

2. Affected by market fluctuations, the price of mining machines may decrease or increase in line with market conditions. We do not assume the obligation of prior notice and price compensation

The following conditions will invalidate the warranty:

1. The mining machine itself was disassembled, and the components were altered and replaced without authorization;

2. Damage caused by lightning strikes, voltage surges, low-quality power supplies, etc.;

3. Damage caused by water ingress, dampness, and corrosion of circuit boards and components;

4. There are burnt marks on the circuit board or the chip is burned;

5. Overclocking.

We have 2 BTC mining farms built by ourselves, have our own professional operation and maintenance personnel, and cooperate with multiple maintenance centers. Before the mining machine is shipped to you, we will test the mining machine and send the test video to you to ensure that the mining machine in your hands can operate normally and minimize the loss of transportation.